About the IC800SLM010N1NE25B
IC800SLM010N1NE25B is manufactured by GE Fanuc Automation as part of the S-Series of Servo Motors. This motor has an IP65 certification and no brake. The specifications are 2.83 in-lb, 100 W, 115 V, and NEMA 23. The output power is 100, the peak torque with SL is 8.0, and the peak torque with S2K with 8.4. The rated speed is 3000 RPM, the maximum speed is 5000 RPM, and the feedback is 2500 lines. This motor is 1.23 lbs. The shaft thrust load is 13.2 lb and the shaft radical load is 15.4 lb. The mechanical time constant is 0.8 ms, the torque constant is 1.86 in-lb/Arms, and the electrical time constant is 0.89 ms. The inductance (phase) is 1.7 mH.
This motor must operate under 85% non-condensing relative humidity, with an ambient temperature between 0 and 40 degrees celsius. The storage temperature must remain between -20 and 80 degrees celsius. IC800SLM010N1NE25B must not experience vibration in excess of 5G or shock in excess of 10G. By reading the part number, the user can identify the following specifications: series, part, wattage, mounting, voltage, brake and key, encoder type, and line number. Please refer to the manual for diagrams and further specifications. Model numbers for replacement parts and brake-enabled motors are also available in the user manual. Electrical damage to the equipment may occur if the user does not adhere to installation and operation best practices. Personal injury may occur if the user ignores danger labels and manual warnings.
