About the IC800VMA302
The IC800VMA302 is a VersaMotion 3000 Watt Series servo amplifier manufactured by GE Fanuc, matched for use with the VersaMotion α and βi Series Servo Motors and GE Fanuc DSM300 Series motion controllers. The rated output power of this amplifier is 3000W. It runs on 220VAC three-phase voltage, 50/60hz +/-5% frequency. Permissible voltage fluctuation for IC800VMA302 is 170VAC to 225VAC and it has an electronic gear ratio of N/M where N: 1~32767, M: 1:32767 (1/50<N/M<200).
IC800VMA302 is 245mm in height, 110mm in width and 206mm in length. The environmental temperature of this device is operating shouldn’t be less than 0°C and above 55°C. If the temperature is above 55°C, forced cooling is required while the temperature of the storage should go from -22°C to 65°C and condensation must be avoided. IC800VMA302 has a built-in dynamic brake which makes it effective for diverse motion applications. The capability of connecting to any analog motion controller or pulse command interface makes it very convenient since it can store up to 8 motion positioning profiles. Built-in touchpad and display allow easy access to system information and configuration parameters but also via VersaMotion software.
Move to home function, position teaching, user-definable acceleration/deceleration and feed step control function are just some of many convenient built-in functions. Some of the key features of IC800VMA302 are external JOG function, built-in keypad/display, standalone single-axis position control, Position/Speed/Torque modes, analog or pulse command interface, electronic gearing with the user-defined ratio, torque limit operation and many more.
Since servo drives are designed for use in combination with specific servo motors IC800VMA302 is designed to work with IC800VMM30LNKSE25 without brake and IC800VMM30LBKSE25 with brake. Output short circuit of IC800VMA302 is 107A(peak) and 3-phase operation current leakage is 0.13mA.
