IC800VMM01LNKSE25

Product Description

IC800VMM01LNKSE25 is a VersaMotion Servo Motor manufactured by GE Fanuc Automation. This motor is 100 watts and does not come with a brake. It is compatible with amplifier #IC800VMA012.

The rated output is 0.1 kilowatts, the rated torque is 0.32 nm, and the maximum torque is 0.96 nm. The rated speed is 3000 rpm, the maximum speed is 5000 rpm, the rated current is 0.9 amps, and the maximum current is 2.7 amps. The rotor moment of inertia is 0.037 kg.m2 x 10-4. The mechanical time constant is 0.75 milliseconds, the torque constant is 0.36 nm/A, and the voltage constant is 13.6 mV/rmp. The armature resistance is 9.3 ohm, the armature inductance is 24 mH, and the electrical time constant is 2.58 milliseconds. The maximum radical shaft load is 78.4 newton and the maximum thrust shaft load is 39.2 newton.

This motor is matched for use with VersaMotion Servo Amplifiers. These motors have a standard shaft seal and an IP65 protection rating. The inertia is low and there is no absolute feedback. The continuous stall torque range is2.83-126 in-lb, the continuous speed range is between 1500 and 3000 RPM, and the maximum speed range is between 3000 and 5000 RPM. The compatible controllers are DSM314. This motor uses metric mounting and a straight/keyway shaft configuration. The construction is brushless, the feedback type is incremental encoder, and the feedback resolution is 10,000 counts per rev. There is a 24 VDC optional brake that can be attached to the motor.