About the IC800VMM04LBKSE25
The VersaMotion series Servo Motor, IC800VMM04LBKSE25, is manufactured by GE Fanuc Automation. This 400 watt motor goes with amplifier #IC800VMA042 and comes complete with a brake.
The rated output is 0.4 kilowatts, the rated torque is 1.27 nm, and the maximum torque is 3.82 nm. The rated speed is 3000 rpm, the maximum speed is 5000 rpm, the rated current is 2.6 amps, and the maximum current is 7.8 amps. The rotor moment of inertia is 0.277 kg.m2 x 10-4. The mechanical time constant is 0.53 milliseconds, the torque constant is 0.49 nm/A, and the voltage constant is 17.4 mV/rmp. The armature resistance is 1.55 ohm, the armature inductance is 6.84 mH, and the electrical time constant is 4.43 milliseconds. The maximum radical shaft load is 196 newton and the maximum thrust shaft load is 68 newton.
The user can read the part number by learning which specifications correspond to each piece of the number. “IC800VMM” indicates the series of VersaMotion motors that this part is from. The next two numbers indicate the wattage, wherein “01” is 100 watts, “02” is 200 watts, “04” is 400 watts, “07” is 750 watts, “10” is 1000 watts, “20” is 2000 watts, and “30” is 3000 watts. The first letter that comes next is either “L” (low inertia) or “M” (medium inertia). The second letter is either “N” (no brake) or “B” (24 VDC brake - except on the 100 watt motor). The third letter is always “K”, which indicates that the motor has a shaft key. The fourth letter is always “S”, which indicates that the motor has a shaft oil seal. The last piece, “E25”, indicates that the motor has a 2500 PPR incremental encoder feedback.
