About the IC800VMM10MBKSE25
The VersaMotion series of Servo Motors includes IC800VMM10MBKSE25, a 1000 watt motor with a brake. This unit is manufactured by GE Fanuc Automation and goes with amplifier #IC800VMA102.
The rated output is 1.0 kilowatts, the rated torque is 4.77 nm, and the maximum torque is 14.32 nm. The rated speed is 2000 rpm, the maximum speed is 3000 rpm, the rated current is 5.6 amps, and the maximum current is 24.9 amps. The rotor moment of inertia is 9.14 kg.m2 x 10-4. The mechanical time constant is 1.64 milliseconds, the torque constant is 0.85 nm/A, and the voltage constant is 31.9 mV/rmp. The armature resistance is 0.465 ohm, the armature inductance is 5.99 mH, and the electrical time constant is 12.88 milliseconds. The maximum radical shaft load is 490 newton and the maximum thrust shaft load is 98 newton.
When installing the servo drive and motor, allow heat dissipation by mounting with sufficient space around the units. Do not mount the motor in direct sunlight or near corrosive gases, liquids, airborne dust, or metallic particles. Do not mount the motor where temperature, humidity, vibration, and shock will exceed the specifications. Do not subject the motor to high levels of electromagnetic radiation. Do not mount the drive in a horizontal position. To ensure maximum heat transfer for maximum power output, and to provide a good ground, mount the servo motor firmly to a dry and solid mounting surface.
