About the IC220MDL751
VersaPoint Discrete Output Module IC220MDL751 is manufactured by GE Fanuc Automation. The output voltage is 24 VDC with 2 output points at a 0.5 load current per point. The connection style is a 2, 3, and 4 wire connection. Protections on this module include electronic short circuit protection and overload protection. The maximum current consumption from Local Bus UL 33 mA. The maximum current consumption of US is 1 ampere. The LED indicator is a Bus Diagnostics Status indication of outputs. The lifecycle status is active.
Discrete output modules send control signals to devices such as contactors, indicator lamps, and interposing relays that can also have two states. This part is also referred to as a digital output terminal. Insert a power terminal after the IC220MDL754 terminal in the event of high simultaneity of digital outputs and maximum current load. The datasheet number is GFK-2003, and the module ID is BD hex (189 decimal). The required terminal strip must be ordered separately.
The module features connections for two digital actuators. 7.5V is the communications power UL. The overload response causes an auto restart. The length code is C2 hex, the process data channel is 2 bits, and the output address area is 2 bits. The parameter channel (PCP) is 0 bits. The register length (bus) is 2 bits. Upon powering down, the output follows the power supply without delay. The inrush current is 1.5A for 2ms, which is the typical maximum. The maximum inductive breaking energy/channel is 1500W (pulse 8/20ms). A free-wheeling diode per channel acts as a protective circuit on the output module.
