369-HI-R-0-F-0-0-E

About the 369-HI-R-0-F-0-0-E

The  GE Multilin 369-HI-R-0-F-0-0-E relay is designed to provide protection for 3-phase motors and associated systems while also offering monitoring options. The unit has multiple built-in functions including customer overload curve, built-in RTD inputs, fiber optic port, and enhanced diagnostics. 

The display on the  369-HI-R-0-F-0-0-E allows users access to alarms and trips at the location of the unit and allows for on-site programming of set points.  The display includes four LEDs to indicate when an output has been activated along with corresponding status indicator LEDs. The 12-key keypad includes a help key to access pre-programmed help screens. The unit is protected by a flame-retardant external casing. 

The back of the 369-HI-R-0-F-0-0-E includes twelve built-in RTD inputs. These are field selectable. The unit has four output relays, a customer-accessible fuse, digital inputs, RS485 ports and an analog output, as well as a fiber optic data link for use within harsh environments. 

The 369-HI-R-0-F-0-0-E offers a time delay of 10 to 1000 ms in steps of 10 with a timing accuracy of +/-100 ms upon start. The unit has reduced voltage start with a transition level of 25 to 300% FLA in steps of 1 and a transition time of 1 to 250 seconds in steps of 1. Transition control can be current, timer, or both. 

The 369-HI-R-0-F-0-0-E is designed for operation within a temperature range of -40C to +60 degrees Celsius when the humidity remains below 95% non-condensing. The unit does not require any special venting requirements in this range, but it is important to note the addition of Profibus, Modbus/TCP or DeviceNet options limits the operating range to +5 to +60 degrees Celsius. For additional information, please refer to GE Multilin manuals or user guides.