About the CV-E300
The CV-E300 camera expansion unit was created and produced by KEYENCE Corporation. The CV-E300 camera expansion unit is part of the CV-3000 series of cameras and camera usage equipment. The CV-E300 unit has since been discontinued by the KEYENCE Corporation, but AX Control may have the unit in stock in either refurbished condition or brand new from surplus stock. Call today to inquire about this or any other product on our website.
The CV-E300 unit connects to the side of the CV-3502P controller module. When connecting, the CV-E300 camera expansion unit can support up to two extra camera connections, doubling the amount the original controller can support. Follow the above link to find the CV-3502P controller module on AX Control’s website.
The CV-E300 camera expansion unit is a very simple device to use and install onto the CV-3502P controller module. On the right side of the CV-E300 camera expansion unit, you will see a large male plug, which can be inserted into the left side of the CV-3502P controller module on the left side.
The bottom of the front faceplate of the CV-E300 camera expansion unit has the two extra camera ports, and those are labeled as “CAMERA-3” and “CAMERA-4.”
The CV-E300 unit is a small, rectangular shaped black device. It is also very light in weight, with an approximate weight of 0.50 lbs. or 0.23 kg., without adding in any of AX Control’s packaging materials to the total. The packaging materials we use ensures that your product will arrive at your facility safely and without any damage.