LK-GD500

About the LK-GD500

The LK-GD500 module is a display panel controller. The LK-GD500 display panel was created and mass-produced by KEYENCE and was designed to be included in KEYENCE’s LK series and related products.

The LK-GD500 display panel is a small black device with two LCD displays and many buttons. The two LCD displays are located at the top half of the device. The top one is located as “OUT 1” and the bottom one is labeled as “OUT 2.” To the right of those labels, there are three more labels that are used to represent the numbers on the two LCD display screens. And those are as follows: “HI,” “GO,” “LO,” and “TIM.” Below the two LCD display screens, there are two rows of labels, one of which is labeled as “HEAD A” and the other is labeled as “HEAD B.” The three columns that are labeled as the following: “LASER ON,” “STABILITY,” “BRIGHT,” and “DARK.” Below that, there are two large buttons. The button on the left is gray and it is labeled as “PROGRAM.” The button on the right is blue and it is labeled as “ZERO.” Below these two large buttons are four much smaller buttons. The button on the left most side is labeled as “SET” and the one all the way on the right side is labeled as “ENT.” The two buttons in the middle are arrows that are pointing in different directions; the left arrow button is pointing to the right and the right arrow button is pointing upwards.

The LK-GD500 display panel is a very small device, weighing in at an approximate total of 0.14 lbs. or 0.064 kg.