About the LK-HD500
LK-HD500 is a separate type main controller that is part of the LK-G5000 series manufactured by Keyence. This controller is compatible with sensor heads and can support up to 2. On the display, the minimum display unit is 0.001 μm, the display range has 7 selectable settings from ±999.999 μm to ±9999.99 mm, and the display cycle is approximately 10 times/second. On the display interface, the display port connects the display unit, and the LED light indicates that the controller is on. The analog voltage output is ± 10 V, and the output impedance is 100 Ω. The analog current output is 4 to 20 mA, and the maximum load resistance is 350 Ω. On the terminal block, there are 2 analog outputs. The inputs are non-voltage inputs. The expansion connector also has non-voltage inputs. The alarm output, comparator output, and binary output are all NPN open-collector outputs. On the RS-232C interface, the baud rate is 9600 to 115200 bps, the data length is 8 bits, the stop bit length is 1 bit, and the parity is none/even/odd. The USB revision 2.0 is high-speed compliant. The ethernet interface is 100Base-TX/10Base-T. Up to 10 head expansion units can be connected to one main controller. The power supply voltage is 24 VDC ± 10%, and the maximum current consumption is 3.5 amps when the maximum number of head expansion units are connected. The weight of this controller without the sensor head expansion units is 600 grams.
