About the KL-N10V
The KL-N10V adapter is part of the Keyence Visual KV Series. The KL-N10V adapter is classified as a KL Link Adapter for a KV Package. The KL-N10V adapter was manufactured by Keyence Corporation, but this model has since been discontinued fully. The OEM does not support this product or offers it new anymore, AX Control offers for our customers the unit in totally reconditioned form and may possibly have units from surplus stock available for purchase.
The KL-N10V adapter is a very small black device. It has one connection port at the top where once unit has the ability to be connected to each of the base units. The communication start address of the KL-N10V adapter is 00H to FEH (0 to 254; where input and output are set totally separate), set in units of 16 inputs or outputs. The occupied address of the KL-N10V adapter is 00H to 80H (0 to 128; where input and output are set separately), set in measurements of 16 inputs or outputs, 1,024 inputs + 1,024 outputs. The CPU unit processing time is 3.125 x the number of addresses needed to transmit to (in µs), if the data happens to be saved when a disconnection occurs. The CPU unit processing time of the KL-N10V adapter is 3.945 x the number of addresses to needed transmit to (in µs), if the data happens cleared in the event that a disconnection occurs.
The type of cable connection for the KL-N10V adapter is a T-shaped branch, multi-drop connection. The KL-N10V adapter’s communication cycle time is approximately 5 Mbps, 2.88 ms/2,048 cycles. The KL-N10V adapter’s dedicated communication media is a KPEV-SB cable (1pc; 2-core shielded twisted pair cable [stranded wire]).
Without any of AX Control’s packaging, the KL-N10V adapter weighs approximately 0.18 lbs. or .08 kg.
