About the KV-16DTP
The Keyence Visual KV Series PLC unit KV-16DTP is not continued by Keyence any longer. These Keyence units can still be found by other sellers like AX Control. This base unit has a Direct Current type of power supply, with 10 in puts and six transistors source outputs. The KV-16DTP can be used as programmable logic controller that is extremely small in size. The input power supply for this KV-16DTP is only 24 VDC as voltage base unit. No more than 2 milliseconds of outage time is allowed for this particular Visual KV unit. The general specs for the KV-16DTP unit and the software can be found in the manual. Programming for this unit is available and can be installed. There is a noise resistor that conforms to EN standards by a noise simulator of 1,500 Vp-p or greater and a pulse rate width of 1 microsecond. The Shock resistance conforms to JIS C 0041, with 150 m/s^2 or 15 G and an operating time of 11 milliseconds. There are 3 axial directions for every 2 times in each shock. The approx weight is around 180g for the this KV-16DTP visual unit. The KV-16DTP's insulation is tested by a 500 VDC megger with a resistance of 50 MΩ or higher. Condensation or freezing of the KV-16DTP unit can corrupt the software or damage the unit. Keep this KV-16DTP Visual unit at around 0 to 50°C or 32 to 122°F and for humidity 35 to 85% RH.
