DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
AVAILABILITY:
IN STOCK
SHIPS TODAY
The KV-5000 is a CPU unit with a built-in Ethernet port. The KV-5000 arithmetic control mode stored program mode. The KV-5000 has an I/O control (refresh) mode. The KV-5000 uses an expanded ladder, KV Script and mnemonic as a programming language. The number of commands for the KV-5000 is as follows,
Basic instruction: 81 classes, 182 instructions
Applied instruction: 42 classes, 59 instructions
Arithmetic operation instruction: 124 classes, 315 instructions
Extended instruction: 124 classes, 315 instructions
Total: 345 classes, 703 instructions.
The instruction execution speed for the KV-5000
Basic instruction: Min. 10 ns
Applied instruction: Min. 20 ns
Double precision floating-point instruction: Min. 2,350 ns
The program capacity for the KV-5000 is approximately two-hundred and sixty (260)k steps. The KV-5000 has a maximum of sixteen (16) units or up to forty-eight (48) units when expansion units are connected. The maximum number of 3,096 I/O points for expansion. The KV-5000 has an input relay, output relay R, and an internal auxiliary relay R has a total of 16,000 points 1 bit. The Link relay B is 16,384 points 1 bit. The internal auxiliary relay MR and latch relay LR of 16,000 points 1 bit. The KV-5000 has a control relay CR of 640 points 1 bit. The KV-5000 has a timer "T" and Counter "C" of 4,000 points 32 bits. The data memory DM and an expansion of data memory EM of 65,535 points 16 bits. The KV-5000 has a memory bank switch mode FM 32,768 points x 4 memory banks 16 bits.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $914 |
Our highly skilled technicians can repair your KV-5000. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved