About the KV-E4XT
KV-E4XT is a four (4) input and four (4) transistor (sink) output by Keyence. The KV-E4XT has a minimum ON voltage of nineteen (19) V. The KV-E4XT has a maximum OFF current of two (2)mA. The KV-E4XT has an input time constant (switchable between 2 levels by using special auxiliary relays 2609 to 2612), with ten (10) ms ± twenty percent (20%), ten(10) µs ± twenty percent(20%) for both rising (OFF to ON) and falling (ON to OFF) edges. The KV-E4XT has a rated load voltage of thirty (30) VDC. The rated output current of the KV-E4XT of zero points five (0.5) A/output. The KV-E4XT has a current leakage while OFF of one-hundred (100) µA or less. The KV-E4XT residual voltage while turned ON of zero point eight (0.8) V or less. The startup operation for the KV-E4XT from OFF to ON is fifty (50) µs or less. The start-up operation of the KV-E4XT from ON to OFF is two-hundred and fifty (250) µs or less. The input maximum rating for the KV-E4XT is twenty-six point four (26.4) VDC. The input voltage is twenty-four (24) VDC, five-point three (5.3) mA. The input impedance for the KV-E4XT is four point three (4.3) kΩ. The KV-E4XT has nine (9) LED lights on the face of the device. Labeled zero to three along the top and the bottom. Along the top, the ports are labeled in purple reading C1, X0, X1, X2, X3, V1, V2, with an IN port on the right-hand side. The bottom of the device is labeled in purple reading C2, Y0, Y1, Y2, Y3, V3, V4.
