L5206-2-00

About the L5206-2-00

This product was manufactured by Parker Eurotherm SSD, and is now entirely out of production and considered by the current standard products to be obsolete.

This is a Link Repeater module unit, given the MPN (manufacturer part number) designation of L5206-2-00. It is the baseline product of the two in the subcategory of Parker Eurotherm SSD’s line of industrial automation technology and equipment parts.

The L5206-2-00 link repeater is a device that interfaces concatenated signal pathways, able to transmit and receive data through fiber optic networking and connectivity.

This unit is fully powered by a minimum intake of 20 volts of direct current, and is built to handle a maximum threshold of power intake up to 28 DCV.

This unit’s physical dimensions of 175 millimeters by 80 mm by 58.93 mm, which is also measured in inches as 6.89 inches by 3.15 in by 2.32 in, and weighing up to 612 grams, or 1.35 pounds.

The L5203-2-00 is placed in a NEMA 4 enclosure that helps protect the device from any sort of damage from dirt and windblown dust, or from water or ice, and great for either Indoor or outdoor use to provide a degree of protection to personnel against access to hazardous parts.

The manual for this item can be found by searching the manual number, HA351223A001, at our website.

If your device isn't functioning at full efficiency and the reason isn’t clear, AX Control can troubleshoot it and find if there are any problems. AX Control’s technicians can repair your L5206-2-00 unit with board level repairs, and run a full diagnostic exam to ensure your device is working properly after repairs are done.