About the L5209-1-00-012
L5209-1-00-012
The L5202 Solid State Drive LINK Digital Input/Output Module was developed and produced by Parker Eurotherm SSD, and able to be configured to perform a wide range of control and process functions, such as relay logic replacing, counting and timing, and complex sequencing.
There are a dozen digital I/O points for use with a Class 2, SELV rated power input device, receiving between 20 to 28 volts of direct current as a power supply. 24 DCV is the nominal rate of voltage for this module. Its current input level requires a maximum of 150 milliamperes, and the input points themselves receive a low input of 4.5 volts and a high input of 16.5 volts.
Each input port presents an input impedance of approximately 3.5 kiloohms (kΩ). The L5209-1-00-012 has the ability to measure frequency and count events on terminal Input 1.
The average operating temperature range for the L5209-1-00-012 goes from 0 to 50 degrees Celsius, or 32 to 122 degrees Fahrenheit. Its ability to endure humidity without producing any condensation reaches up to 90% humidity.
AX Control offers a three year warranty on this I/O module, and our group of technicians and sales representatives are ready and standing by to help with any questions, price quoting, and product repair or replacement.
AX Control merchandise are guaranteed not DOA and all products are automatically warrantied upon purchase. If an item is found to be defective through normal use and wear and is within the 3 year period, then AX Control will, per the warranty, repair or replace the broken item.
