About the APL3600-KA-CD2G
APL3600-KA-CD2G is an Industrial Node PC that is manufactured by Proface as a part of the APL3000 series. Optional items for the APL3000 series PC include the DIM module (512 MB, 1 GB, 2 GB), the hard disk unit (60 GB, 250 GB), the SSD unit (16 GB), the CF card (128 MB, 256 MB, 512 MB, 1 GB, 2 GB), the USB front cable, the DVI-I-RGB conversion cable, the DVI-D/RGB branch cable, the AC power supply connector (right-angle), the DC power supply connector (right-angle), the software mirroring utility, the screen protection sheet, and the panel-cut conversion attachment brackets. The maintenance items for this series include the installation fastener, the AC power supply connector (straight), the DC power supply connector (straight), the installation gasket, and the replacement backlight.
The PC has an LED light that indicates the power status. When the power LED is solid green, the power is on and the PC is in normal operating mode. When the power LED is blinking green, the PC is in a soft OFF state. When the power LED is solid orange, there is an error in the system monitor (RAS error). When the power LED is blinking orange/red, the system has detected a backlight burnout. When the power LED is not lit, the PC power is off. The PLC-3600 series display is a TFT color LCD 12.1 inch display. The pixel density is 800 x 600 (SVGA) and the dot pitch is 0.3075 x 0.3075 mm. The display area is 248 x 186.5 mm, and there are 262,144 display colors. There are 4 adjustable brightness levels on the touch panel.
