FN-DA04AH11

About the FN-DA04AH11

FN-DA04AH11, the 4 channel Digital/Analog conversion unit from Digital Electronics Corporation. This Flex Network Analog Unit is used to convert internal analog signals into digital signals for Pro-face’s Graphical Logic Controllers.

The weight of this unit before packaging is 350g. The external dimensions are H50mm x W168mm x D50mm

The Flex Network Drivers, GP-PRO/PBIII C-Package, LT Editor, and GP-Pro EX as an I/O Driver. These can be downloaded via Pro-face’s web site. Please Refer to the User manual we provide for proper installation procedures. This includes steps on connection to our Pro-face HMIs, Electrical and Environmental Specifications, systems settings, etc.

Some Important Spectifications are as follows:

• For continuous output to all 4 channels simultaneously, the output current for each channel should read as no greater than 10mA (40mA all together).
• The rated voltage for these modules are DC20.4V to 28.8V with a power consumption rating of 7.2W or less.
• Ambient Operating Temperatures should be held at 0 - 55 degrees C
• Ambient Storage Temperatures should be kept at a greater range of -20 - +70 degrees C