GLC150-BG41-ADPK-24V

About the GLC150-BG41-ADPK-24V

The GLC150-BG41-ADPK-24V is one of several LT I/O control-equipped operator interfaces available from AX Control. These small touch panel systems were the forerunner to the LT3000 series and were introduced by Pro-face in the early 2000s. If you are interested in upgrading to an LT3000 series HMI, let our staff know. The GLC150-BG41-ADPK-24V is a Type H1 5.7 RTD temperature graphic controller. The unit is built with a 32 DIO sink-type board, a PT100 RTD, and two analog inputs as well as two analog outputs. The DIO standard input on this unit can be used as a high-speed counter input or as a pulse or PWM output. The setup for either of these is done through the LT Editor/C-package. When installing the GLC150-BG41-ADPK-24V, you should be sure to use the proper installation fasteners and gasket. These items maintain the integrity of the equipment after placement within a cabinet or panel and limit the ingress of contaminants. Pro-face manuals will have instructions on the proper amount of torque necessary to mount the unit as well as wiring requirements. The GLC150-BG41-ADPK-24V should be properly grounded using an independent grounding electric wire that does not cross over other wires. For other information about installation or maintenance of the GLC150-BG41-ADPK-24V, refer to manuals or user guides originally published by Pro-face. AX Control may have copies of these available through our site. Our website has individual pages devoted to more information about shipping, warranty, and payment terms, as well as a FAQ page. If you have additional questions, please don t hesitate to reach out to our staff.