GP270-SC11-24V

About the GP270-SC11-24V

The GP270-LG31 is a black and white monochrome LCD, with a display area of 96(mm)W x 72H (mm). This display unit offers Blink or Reverse video. The display panel has 320 x 240 pixels. The internal memory of the GP270-LG31 can save up to 160 screens with a standard screen size of 1.6 Kbytes on a Flash EPROM with 256Kbytes of storage. 
            
These units are compatible with Pro-face’s full-featured GP-PRO 03 HMI development software so you can write your own simple ASCII protocol. This unit is ideal for basic graphical HMI applications such as monitoring environmental chambers, tank levels, machine on/off status, part tracking, system event monitoring, heat treating, etc.
                                                    
Complete regular checks of your system to make sure that it works properly. Check the cables that they are attached properly, make sure that the temperature is in the allowable range, that the humidity is in the proper range, and that the atmosphere is free of corrosive gasses. Do not use the GP270-SC31-24V in an environment that exceeds fifty degrees Celsius. This will cause the unit to malfunction and start to break down. When installing this unit make sure that it is located as far as possible from electromagnetic circuits, non-fuse type breakers, and any other equipment that can cause arcing.