AGP3302-B1-D24

About the AGP3302-B1-D24

The AGP3302-B1-D24 belongs to the GP3000 series of HMI operator interfaces released by Pro-Face.  This series is designed to be used in industrial settings where commercial machines may not hold up to the demanding and rugged conditions.  

The AGP3302-B1-D24 is built with a 5.7 inch blue-mode monochrome LCD.   The unit has a dot pitch of .36 x .36 mm and a resolution of 320x240 PCI.   It has eight levels of contrast and brightness that can be adjusted from the touch panel and is backlit by a non-replaceable CCFL.   It is powered by a 24 VDC supply. 

This unit is designed only for use within indoor settings where the unit has been panel mounted.  Without vertical mounting, the unit will not meet the UL, c/UL, or CE standards as marked.   This mounting is to allow the unit to be properly protected, as the rear of the unit does not meet standards for an enclosure, as well as to provide the unit with proper cooling. 

The AGP3302-B1-D24 can be used in ambient air temperatures of 0 to 50 degrees Celsius when properly installed in a vertical panel.  A slanted panel with an incline of no more than 30 degrees will not affect the operating temperature of the unit.  However, beyond a 30 degree incline the user may need to add some type of forced air cooling to maintain the unit at a lower operating temperature of 40 degrees Celsius to ensure proper operation. 

Please review the extensive information provided within the ProFace manuals regarding grounding procedures, torque requirements, and other necessary installation procedures before you begin any kind of installation on this part.