AGP3310-T1-D24

About the AGP3310-T1-D24

The AGP3310-T1-D24 from ProFace is part of the company’s GP3000 series of HMI operator interface units.  This series is designed to offer rugged, reliable service for industrial settings where commercial machines might fail due to conditions with excess vibration or other conditional challenges. 

The AGP3310-T1-D24 is designed with a small, 5.7-inch TFT color LCD display enabled with up to 65,536 colors.  The touch panel has a screen resolution of 1024 x 1024 and offers eight levels of adjustment for brightness available from the panel.  The AGP3310-T1-D24 requires a 24 V DC input. 

The AGP3310-T1-D24 can only be used inside in locations where it has been mounted vertically in a panel.  This unit will not cool properly or be protected if it is used without panel mounting.  The rear of this unit is not approved as an enclosure on its own. 

The  AGP3310-T1-D24 is designed to be used in a vertical panel only, within temperatures of 0 to 50 degrees Celsius.   If the user chooses to mount it in a panel with an incline, you may do so with no loss to operation to 30 degrees in either direction.  However, if you choose to install the unit at an incline of more than 30 degrees, the unit may require additional cooling in the form of a fan or a/c to ensure it remains at a lower operating temperature (no more than 40 degrees Celsius. 

ProFace manuals like the GP3000 Hardware manual have important guidelines and instructions regarding installation procedures for this equipment.  These should be reviewed completely before unboxing your new part.