AGP3310H-T1-D24

About the AGP3310H-T1-D24

The AGP3310H-T1-D24 is a hand-held HMI in the Pro-face line manufactured by Schneider Electric. The AGP3310H-T1-D24 is a tethered HMI with a full graphic touchscreen. The module is designed with emergency stop, a key switch, and a 3-position enable switch. The AGP3310H-T1-D24 is compatible with GP-Pro EX V2.20 and newer development software.

The AGP3310H-T1-D24 can be used with maintenance carts or portable machine diagnostics. It supports dual protocols with serial and Ethernet protocol selection. The AGP3310H-T1-D24 can connect directly to a PLC or can be connected to quick-disconnect access points.

The AGP3310H-T1-D24 has the following features:

The display includes

• TFT color LCD (65k colors)

• White LED with a service life of 50,000 hours at 25 degrees Celsius

• 640 x 480 pixels (VGA)

• The touch panel is resistive IM analog 1024 x 1024 resolution

• 11 function keys

Memory

• 8 MG Feprom

• 320Kb Sram with lithium backup battery

Available interfaces include

• Serial interface (COM 1) RS232/422/485

• Ethernet interface 10BaseT/100Base TX

• USB (1 port)

• CF Card

• Emergency switch

• Enable switch. 3 position

• Emergency stop switch

• Enable Key Switch

The user should be sure to connect peripheral equipment first and connect the GP unit last to avoid failure of the serial interface. Be sure to terminate unused wires to avoid short circuits. If the cable's connector drops or hits against anything hard, the connector could be damaged. Please use caution.

The AGP3310H-T1-D24 is rated 24V DC, 0.625A. Rated for operating temperature of 0 to +40 degrees Celsius, 10 to 90% humidity, non-condensing. The AGP3310H-T1-D24 is UL and cUL listed and CE marked.