AGP3400-T1-D24-FN1M

About the AGP3400-T1-D24-FN1M

The AGP3400-T1-D24-FN1M is a 7.5-inch operator interface unit from Proface Xycom.  This GP3000 unit offers a total HMI solutions package along with integrated GP-Pro EX software.  

The AGP3400-T1-D24-FN1M unit is a FLEX NETWORK board type.  This distributed I/O architecture can reduce installation costs and wiring needs by allowing users to put inputs and outputs where they are needed.    Such networks can easily integrate with existing equipment and allow the incorporation of technological advances with minimal expense.   They can improve system reliability by simplifying system maintenance through limited customization. 

The AGP3400-T1-D24-FN1M uses a 24 VDC power supply.  It is UL and cUL listed and CE marked, it also carries a NEMA 4x/13 rating and an IP65f rating when properly installed according to manufacturer specifications.  The unit has a no-grid analog touch screen.  

The unit is designed to operate in an environment where the relative humidity remains between 10% and 90% non-condensing.  The operating temperature should remain between zero and 50 degrees Celsius. 

Documentation will show you allowable configurations.  Up to four PLC protocols can be supported simultaneously.   This network uses industry-standard twisted-pair network wiring. The network can support an I/O update rate of 10ms.  Connections can be made up to 200 meters away.  It can support 8-relay discrete outputs, 16-point discrete inputs, or sink transistor outputs.  It can also support 2-channel analog inputs and 4-channel analog inputs.     Refer to Pro-face manuals and user guides for more information.  

AX Control can provide you with a specific turnaround time and shipping estimates to your location with a single email or phone call.  Talk to our team today.