About the AGP3500-S1-AF-D81C
The AGP3500-S1-AF-D81C is one of several Pro-face HMI/operator interfaces available on this site. This unit offers multiple interface connections and discrete I/O to allow the machine to offer reliable control on your factory floor attached to an easy-to-read display. The AGP3500-S1-AF-D81C is also known as PFXGP3500SAADC.
The AGP3500-S1-AF-D81C has a 10.4 inch STN display that can show over 65K colors on its bright, hi-res touch screen. The no-grid analog panel offers improved visibility and better part placement. The unit can support up to 4 protocol drivers at one time. The HMI has online logic program monitoring, which means users can view programming on the HMI without the need for an attached laptop. This allows for the fast identification of sequential logic faults.
The AGP3500-S1-AF-D81C is built upon a 64-bit 266 Mhz CPU. The unit has high-speed application transfer and uses interface protocols like 10/100 Base-T Ethernet, Serial (MPI), USB, and CompactFlash communication. It can also connect to audio outputs, buzzer remote reset interfaces, and alarms.
The AGP3500-S1-AF-D81C is built with a source-type DIO interface. If you require a sink-type interface refer to AGP3500-S1-AF-D81K; that is the same version HMI as this but with a different DIO board installed.
Please read through original documentation from Pro-face for additional information about this part including proper temperature ranges for operation. This unit is air-cooled. The AGP3500-S1-AF-D81C should only be installed indoors in locations where large, sudden temperature changes will not occur. Such changes may cause condensation to form within the machine that may then cause the equipment to malfunction.
