5015T

About the 5015T

The 5015T is a high-resolution flat panel display with a resistive membrane touch screen and rugged housing created by Pro-Face. This is a fifteen-inch (15”) flat panel that supports resolutions up to 1024 x 768. The mounting depth for this panel is 2.9”. This panel has a five-wire analog resistive touch screen with either USB or RS-232 interfaces. This panel has on-screen menus and a lock-out switch near the rear of the unit. The panel has an optional 24V DC input power. The front of the panel has controls along the bottom labeled (1) LCD ON/ OFF, (2) AUTO, (3) MENU, (4) LEFT, and (5) RIGHT, with a small power light to the far right. Below is a small example of what each button does. 

 (1) LCD ON/OFF Power On/Off POWER (LED) Power Indicator On = Power On Off = Power Off. (2) AUTO Automatically optimize positions, phase & clock when OSD is not shown. Exit the OSD menu when OSD is shown. (3) MENU Enter OSD Access sub-menu & selection. (4) LEFT Selection or adjustment when OSD is shown Quick Volume adjustment (Unused). (5) RIGHT Adjustment when OSD is shown Quick Volume adjustment (Unused). 

The 5015T supports video modes. It supports the following 1024x768, 800x600, 640x480. All of the video modes are non-interlaced. The AC power for this panel is 100-240 V AC, 0.6A, 50/60 Hz, 27W Nominal. The DC power for this panel is 18-30 V DC, 1.4A maximum, 26W Nominal. This panel will work at an altitude from Sea level to 10,000 feet.