PSL-CONV00

About the PSL-CONV00

PSL-CONV00 Proface Product details and technical specifications for use with GLC-2600/2500 Series of HMI's.

Connect to a SIEMENS PLC or MPI using the commercial type PROFIBUS connector COM2. Suitable for LT4000M/GP4000M series modules with a 5.7-inch display. SIO to RS-422 terminal block conversion used to connect the GP2000H series RS-422 conversion adaptor to the GP3000H using Proface PSL-CONV00 D-Sub connectors.

10 meters in length.  Transmission of screen data from a USB connection connected to a PC (Type-A USB) to a USB (Mini-B) man-machine interface PSL-CONV00A1/A2/B+ DIO (5 / set) type connector (welding type) (1)COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector when the man-machine interface is fitted on the hard panel to offer dust and moisture-proof function. Connect your computer to a USB printer (Type-B) PSL-CONV00 is a Proface product. The host's man-machine interface is connected to the primary controller for the MPI communication I/O module, which includes 32 points NPN/PNP input, which has been replaced by a slew of backlights. The cable connects to the COM1 interface (RS-232C), used to connect directly to a PLC FX CPU series (not the same time using the programming controller) Extending the alarm and character table functions of the EX GP-Pro with memory OMRON SYSMAC series PLC or another main controller) attached to GP, length: 5 m. Proface PSL-CONV00. Thin-film for surface protection of man-machine interface against fingerprints and water, 10.4 inches (TFT).