About the 0-57407-
The 0-57407- unit is a DCS processor module for the AutoMax series of programmable controllers which was designed and produced by Reliance Electric. At AX Control, we make a continuous effort to keep the 0-57407- processor module in stock for our customers’ convenience despite being discontinued by Reliance Electric. To check on the availability of the 0-57407- processor module within our stock, please reach out to us either via our email address or our phone number.
The 0-57407- processor module has only a few components on its faceplate. At the very top of the faceplate, you will find two yellow buttons. These buttons are labeled with the black text “FAULT CODE” directly above it. The yellow button on the top is labeled as “1ST” while the one on the bottom is labeled as “2ND.” In between these two yellow fault code buttons, there is a small green indicator light with the labeling “OK” directly to the right of it.
Further down along the faceplate, there are two female parallel ports. The port on the top is labeled as the “PROGRAMMER” port, while the port on the bottom is labeled as the “LOCAL COMM” port. There are numerous screws located in places that allow for easy installation. For a specific installation guide, refer to the original manufacturer’s manual.
The 0-57407- processor module has a total estimated weight of approximately 2.00 lbs. or 0.91 kg. This total does not include any of the packaging materials that we may include as part of the shipment that we send out to your facility.