0-57443-

About the 0-57443-

The 0-57443- unit is a Remote I/O Scanner Module with Adapter Mode. This device was made by Reliance Electric for the AutoMax series. We may have this product in stock despite it no longer being supplied by the original manufacturer. For more information on this device’s availability within our stock, please give us a call or send us an email.

The 0-57443- scanner module was designed to link the AutoMax DCS to the I/O devices that communicate using the remote I/O link. The 0-57443- scanner module has the ability to support remote I/O communication rates of 57.6, 115.2, and 230.4 kbps. In addition to that, the 0-57443- scanner module has the ability to support 1 slot, 2 slot, and ½ slot addressing of a maximum of 32 AutoMax racks. These compatible AutoMax racks can be ¼, ½, ¾, or full racks. Also, you can use the 0-57443- scanner module to function as a controller for other devices, such as a Flex I/O, a Block I/O, or a Remote I/O Adapter Module, for example.

On its faceplate, the 0-57443- scanner module has only three components. At the very top, there is a 7-segment LED display that will show the user error and status information when appropriate. There is a small green LED below that display which is designed to show that the 0-57443- scanner module is both ON and working properly. Down at the bottom of the 0-57443- scanner module’s faceplate, there is a Phoenix-type Remote I/O connector, and this connector allows you to establish a connection with a remote I/O link cable segment. This is made out of six pins, with the bottom three pins allowing you to connect a daisy chain remote I/O cable segment to it.