57C341

About the 57C341

The 57C341 is the Run-Time Programming Executive Software Version 3.3 made by Reliance Electric. This software is no longer being supported by Reliance Electric and may be hard to find. AX Control does try to keep it in stock. However, we do ask that you call us directly to inquire about its availability.

The 57C341 was an Operating System designed for the AutoMax series of controllers. This is not the full version of the OS and will offer limited functionality for your system. This software will still let you perform the following functions: it will allow you to run and stop tasks that your devices are performing, you can load files onto the rack, and you can monitor the tasks running on devices within the rack. It is vital that you load this software onto your PC configuration before you attempt to load it onto a device on your AutoMax Card Storage Rack. Once it is installed, you can then start to load files and commands onto the devices of your rack.

Before you load the 57C341 onto your computer, you need to make sure that your PC meets certain requirements. You need to have an IBM compatible system that has 64KB of RAM and a 40MB hard drive. You need to have an OS on the computer that is PC-DOS or MS-DOS version 3.1, 3.2, 3.3, 4.01, or 5.0. Finally, you need to make sure you have a COM port that can communicate with your AutoMax Processors.  

Please refer to Instruction Manual J2-3060 for a complete guide to installing and maintaining this software program.