O-57334-

About the O-57334-

The O-57334- module is a 6-slot rack that Reliance Electric made to house AutoMax modules. The O-57334- 6-slot rack’s production has been halted by the original manufacturer, but AX Control may still have it in stock, which you can check on our website and by contacting us.

The O-57334- rack can hold a total of six AutoMax modules as well as the applicable power supply module. Also inside of the rack, you will find a Multibus backplane which provides the means to set up two bus lines for local communication purposes among the AutoMax modules. In addition to these aspects, the O-57334- rack includes a cable management tray, a high capacity cooling fan, a surge protector, and an AC line filter built into it. All of the AutoMax racks are designed for panel mounting procedures. 

For installation of the O-57334- rack, be sure to abide by the following steps. Start by mounting the rack to a panel that is made of heavy gauge steel that will be sturdy enough to hold the weight of the rack. Be sure that the rack is mounted in such a way that the cables and the terminal strips are easily accessible. Then, the power supply must be placed into the rack. The terminal strip end must also be mounted to the assembly for the I/O modules on either the lashing bars or the panel. Fasten the wiring for the external hardware to the terminal strips and then attach the connector ends of the terminal strip to their mating halves on the modules. You may then wire this rack. After that, turn on the system’s power.

The O-57334- 6-slot rack, when it is fully loaded with AutoMax modules, has a total approximate weight of 40.00 lbs. or 18.14 kg.