About the O-57402-
The O-57402- device was created to be a part of Reliance Electric’s AutoMax series. This device was created to be a 24-115 V AC/DC Low Power Output Module. Reliance Electric does not produce the O-57402- low power output module anymore, but AX Control may have it in stock, which is shown on this page.
Hardware Tips and Specifications
The O-57402- low power output module is typically used to control the power of devices that require lower than 200 mA of current and have a low leakage current in the off state. For example, the O-57402- low power output module can control the power of devices such as small relay coils or even pilot lights. The output signal voltage can range from between 24 and 115 V and DC through 60 Hz. The output current can be set to a maximum of 200 mA with a leakage current that cannot exceed 1 mA. This module has a total of four isolated commons that each contain four inputs of their own.
The front of the O-57402- low power output module has a female connector sockets in addition to sixteen LEDs that are designed to illuminate whenever the labeled status of the outputs are tripped. These LEDs are labeled from the number 0 through the number 15. The multi-conductor cable is used to send output signals away from the O-57402- low power output module. The connector socket and the cable plug on the faceplate are keyed in such a way that the cable is prevented from being plugged into the incorrect module. This O-57402 Digital AC/DC Low Output Unit can be both repaired and replaced here at AX.
