About the S-67118
Greater Product Series Information
The S-67118 is an AutoMax Multibus I/O System Isolated Analog Output Module. It was initially created by Reliance Electric but could have also been mass-produced by ABB and Baldor Reliance depending on its production dates. 57C410 is an alternate part number for this module. Despite whatever original manufacturer this S-67118 Analog 4 Point Output Module product could have first been produced under, it has to be considered a legacy series product offering, as its original production across all of these companies was actually halted due to a full-scale manufacturing functional obsolescence.
Hardware Tips and Specifications
As with any Reliance Electric product offering, this S-67118 Analog 4 Point Output Module device here makes use of a sophisticated modular assembly comprised of numerous interlocking hardware components working in harmony to introduce its intended product role within a greater automated assembly. For this S-67118 Analog 4 Point Output Module:
- The S-67118 is an output module that has four channels that are individually isolated.
- It has a 12-bit resolution and is 10 VDC. It has a maximum of 10 mA output and a current between 4-20 mA.
- It has a 2500 V isolation that is from logic-to-channel and channel-to-channel.
- It has an output filter that can maintain a first order lowpass of 100 Hz.
- In general, the S-67118 Analog 4 Point Output Module is simply made up of a protective casing, PCB, and a faceplate.
Diagnostic Tips and Specifications
While this S-67118 Analog 4 Point Output Module product offering's general hardware components are important, its various LED indicators are almost just as important as the entirety of the rest, as they were specifically included on this S-67118 Analog 4 Point Output Module device's assembly by the original Reliance Electric AutoMax manufacturer with the sole intended purpose of displaying relevant S-67118 Analog 4 Point Output Module function and functional fault conditions. For starters:
- There are 4 LED indicators on the S-67118.
- These indicators are alphanumerically labeled ISOL Power 0 though ISOL Power 3.
- These LEDs have the ability to display the power status of the output channels.
- There are also 20 connections on the faceplate and two dials.
- One dial is labeled 1-3/6-8 and the other is labeled B-D/E-G. These are the only components on the module’s faceplate.
The S-67118 can plug into an AutoMax card rack and takes up a single slot. The card slides into a space on the backplane of the rack and can then additionally secured using the card's brackets and two screws to attach it to the rack’s brackets. The brackets on the module can also be used to safely remove the card from the card slots if needed.
