DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
Manufacturer | Reliance Electric |
Series | DC3 |
Part Number | DC3R-12D-00-010-AI |
HP | 0.25/2 HP |
Input Voltage | 115/230 VAC |
Phase | 1 Phase |
DC3R-12D-00-010-AI is a Reliance Electric DC3 series regenerative drive. “00” means that the drive is contained in a chassis enclosure. “AI” means that the drive has an isolated reference input of 0-10 VDC and 4-20 mA. Information on installation and operation of the drive can be found in the user manual
The maximum speed trimpot adjustment range is 0-90% of the rated voltage. The minimum speed trimpot adjustment range is 0-25% of the rated voltage. The acceleration time range with no load is 0.5-6 seconds. The deceleration time range with load is 0.5-6 seconds. The Forward and Reverse torque maximum is 200% of the rated current. The input impedance (S0 to S2) is 32 k ohms. The maximum field current is 1 ADC. The maximum AC line distribution KVA with a 115 VAC input is 25 KVA, whereas with a 230 VAC input, the maximum AC line distribution KVA is 50 KVA. The field voltage at 115 VAC is 50 VDC from F1 to L1 and 100 VDC from F1 to F2. The field voltage at 230 VAC is 100 VDC from F1 to L1 and 200 VDC from F1 to F2. The speed range is 60:1. The speed regulation (with a 95% load change) with armature feedback is 1% of the base speed or better. The speed regulation (with a 95% load change) with tachometer feedback is 0.1% of the base speed. Below 50 Hz, maximum vibration allowed is 0.5 g. Above 50 Hz, the maximum vibration allowed is 0.1g.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $459 |
Our highly skilled technicians can repair your DC3R-12D-00-010-AI. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved