About the 0-48680-118
The 0-48680-118 is a regulator circuit board that used to be produced by Reliance Electric. The 0-48680-118 has twelve individual male connection terminals around the edges for the circuit board, along with two female connection terminals near the center of the board. The 0-48680-118 also has a large standard female terminal block that is bright orange, and a small black standard female terminal block. The 0-48680-118 regulator card uses fourteen integrated circuits and microcontrollers to regulate the performance of the card. These components contain all the data and information that makes the card function at ay given time. The 0-48680-118 features a series of jumper pins around the circuit board that has green caps. There is an encapsulated transformer in a corner of the circuit board covered with a DANGER sticker that pertains to the transformer and the black standard female terminal block. The 0-48680-118 regulator card is covered with hundreds of SDM (surface mounted resistors) and multilayer chip ceramic surface mounted capacitors. These pieces get rid of (resistors) or stores (capacitors) energy as directed by the fourteen integrated circuits. The 0-48680-118’s bright orange standard female terminal block also has wires placed in each port that connect with white connection harness. The 0-48680-118 is extensively labeled with what each part is and how many are on the card albeit in very tiny writing. The card also has the part number (0-48680-118), the maker (Reliance Electric) and where it was made (Japan) printed on it.
AX Control is here to help.