About the 0-51378-15
Reliance Electric was the company that was responsible for the creation and distribution of the 0-51378-15 gate coupling printed circuit board. The 0-51378-15 gate coupling board is typically stocked at AX Control, even though it has been discontinued by the original manufacturer. If you would like to purchase the 0-51378-15 gate coupling board, then feel free to contact us either by email or by phone, where you can ask us any questions that you may have about this or any of our other products.
The 0-51378-15 gate coupling board was created to be attached onto a Reliance Electric rectifier stack, such as the 86466-58R model. The 86466-58R rectifier stack is also available within AX Control’s stock, so feel free to use the link in the previous sentence above if you need to purchase one of those to go along with the 0-51378-15 gate coupling board. The 0-51378-15 gate coupling board is small enough to fit perfectly onto the top of a rectifier stack. It has a wire that runs from the top of the board to a port that lies somewhere in the center of the rectifier stack.
The 0-51378-15 gate coupling board only has a few electrical components on it. There is a large transistor on the top that is secured by a metal bar. There is a small rectifier and a small diode above it. In two of the 0-51378-15 gate coupling board’s corners, there is a small hole where you can feed wires through so that the board may be properly connected to the rectifier stack.
The 0-51378-15 gate coupling board only weighs about 0.10 lbs. or 0.045 kg.
