0-51378-33

About the 0-51378-33

Reliance Electric is the creator of the 0-51378-33 gate coupling card. The 0-51378-33 gate coupling card was also manufactured by the company names Baldor Reliance and Asea Brown Boveri under the same product number.

The first thing that you will notice about the 0-51378-33 gate coupling card will be the many different long wires that are attached to the board which have pink connection ends. The majority of the wires are in four groups of four of the following colors: red, green, brown, and yellow. These groups of wires are attached to the bottom of the 0-51378-33 gate coupling card, where they connect to four transformers that are on the top side of the board. The top of these four transformers have black text which read, “H1,” “H2,” “X1,” “X2,” “X3,” and “X4.” Above these transformers, there is a small hole where you can feed wires to each side of the board. 

The remaining two wires are black and yellow, and they are attached to one of the short sides of the board. Next to these two isolated wires, you will find two the 0-51378-33 gate coupling card’s only two jumpers located on either side. In the bottom right corner of the 0-51378-33 gate coupling card, you will find a row of eight electrical components. This row consists of four resistors and four diodes, which are lined up in an alternating fashion. 

The 0-51378-33 gate coupling card weighs approximately 0.35 lbs. or 0.16 kg. This total does not include any of AX Control’s packaging materials.