About the 0-51418-2
The 0-51418-2 unit is one of the many printed circuit boards that was developed and produced by Reliance Electric. The 0-51418-2 printed circuit board continues to be stocked at AX Control despite being a discontinued product by Reliance Electric and therefore no longer sold new by them. To check on the availability of the 0-51418-2 printed circuit board, please give us a quick call or send us an email. We can also give you a quote if you are interested.
The 0-51418-2 printed circuit board is a double sided board. The two sides are completely identical, so the following description applies to the bottom side as well as the top side. On the surface of the 0-51418-2 printed circuit board, there is a small grid. The top of the grid is labeled from 0 to 30 in increments of five. The left hand side of the grid is labeled alphabetically from A to S. The grid is then split up into six rows of five rectangles. Using through hole mounting techniques, there are nine long resistors that are suspended above the grid. These nine resistors are split up into three groups of three. At each end of these groups of three, there lies a small metal tab. These tabs are labeled from the numbers 1 through 6. These long resistors are held to the board by large black hooks. In between the two sides of the board, there are three metal hooks that are used to attach the board onto an applicable place.
The 0-51418-2 printed circuit board has an approximate weight of 0.83 lbs. or 0.38 kg. This total does not include any of the materials that AX Control uses for packaging purposes with every single shipment.
