About the 0-51418-4
The 0-51418-4 module is a circuit board that Reliance Electric designed and produced. AX Control typically has the 0-51418-4 circuit board in stock, even though it is no longer offered new or supported in any way by the original manufacturer. You can call AX Control for more information on the 0-51418-4 circuit board’s availability and for the chance to ask any questions about its uses and features.
On the surface of the 0-51418-4 circuit board, there is a small grid. The top of this grid runs from the numbers 0 to 30 by multiples of five. The left side of this grid has letters rather than numbers, and they run alphabetically from A to S. On top of the 0-51418-4 circuit board’s grid, you will find nine long resistors. These resistors are grouped up in three groups of three and are each secured by a black hook.Adding on to that, each resistor is attached to the board using through-hole mounting, where there are small metal wires that are attached to them on either side. Along each of the grid’s longer sides, there are three metal tabs that are lined up next to each of the three groups of resistors. These metal tabs are labeled using the numbers 1 through 6. Located in each of the four corners of the 0-51418-4 circuit board, you will find a small screw that is used to secure the board in place. Also to assist in securing the 0-51418-4 circuit board in place, you can see there are a few hooks located on the underside of the board.
