About the 0-51476-47
The 0-51476-47 is a replacement PC Board created by Reliance Electric. This board may have been sold by Baldor Reliance and Asea Brown Boveri depending on what year it was being mass-produced.
The 0-51476-47 is PC Board for Kit Model 34C419 which is an Ammeter Kit used on various Reliance Electric Three-Phase Input AC V*S Drives. The Ammeter kit typically comes with a NEMA rated enclosure, an ammeter, a current transformer, and a pc board. This part number represents just the PC Board.
The 0-51476-47 features two large holes in the center of it that are used to secure the card into place. On the other side of the holes is a diode and two large blue resistors. This card is laid out in a grid pattern.
This kit has a potentiometer in the top left corner that is used for calibration. Typically calibration is already factory set and should not be needed, but if it is needed then you can set the drive to 60hZ. Once you have done that, you can then use a clamp-on test ammeter on the motor that leads to a current transformer. This board also has a terminal strip on the bottom edge of the card.
For more information about the 0-51476-47 PC Board and the ammeter kit it goes with, please refer to the Reliance Electric Instruction Sheet, D-3092-3.
AX Control asks that you call us directly for the availability of this product. If we have it in stock, then we can give you an official price quote and discuss shipping options with you.
Reliance Electric has been known for its drives and motors for decades. Some of the company's parts are widely used in the aerospace industry.
