About the 0-51476-66
The 0-51476-66 is a 60-150 HP Meter Calibration Kit designed and manufactured by Reliance Electric for their MinPak Plus VS drive systems. This system and the associated replacement parts may have also been sold under alternate company names of ABB, Asea Brown Boveri, or Baldor Reliance. The board is one of several modification kits available for the MinPak Plus drive.
The 0-51476-66 is a UL listed and CSA certified part. It is designed to measure regulator and controller signal voltages with a voltmeter. When wiring this part into the MinPak drive, caution should be exercised to ensure connections are made properly and completely. Failure to make proper electrical connections could result in damage to the equipment or injury to personnel. Power should be removed from all equipment before installation. Be sure the Meter Calibration kit is properly installed and calibrated before putting it into use.
Minpak drives and their associated equipment should be used in ambient conditions from 32 degrees Fahrenheit to 131 degrees Fahrenheit. Be sure humidity remains between 5% and 95%, non-condensing.
For additional information about this unit or about other available modification kits, please refer to original documentation for the MinPak Drive like manuals or data sheets, or reach out to our staff.
AX Control can ship anywhere around the world not currently affected by US Embargo. We pack all our shipments carefully so they arrive in the same working condition as they leave our facility. Most in-stock products will be packed and shipped within hours of your order being processed.
