0-51849-1

About the 0-51849-1

The 0-51849-1 was a GDCB Gate Driver Control Board created by Reliance Electric for the HR2000 series. This driver may have also been produced by Asea Brown Boveri and Baldor Reliance depending on what year it was being put into production. This board is retired and no longer being produced by the manufacturers, but AX Control does attempt to keep this item in stock. Please call us to find out the availability and the condition of this item.

The 0-51849-1 was a replacement part for a MaxPak. The 0-51849-1 is a longboard with a handful of parts but can hold up to six smaller circuit boards secured using a metal bracket at the back of the circuit board. These six circuit boards do come with the 0-51849-1 when it is sold. The six cards are identical and feature a series of capacitors, resistors, and diodes that are laid out on a grid-patterned card. At the front of the 0-51849-1, there are two large capacitors and a tiny capacitor. There is a light pink fusible resistor and a small orange carbon composition resistor. The 0-51849-1 also has a larger power relay in the center and a transistor right next to it. This entire setup is already mounted onto a steel front faceplate using a bracket and three screws. This entire setup can then be slid into another enclosure.

If you have any questions about the 0-51849-1, please don’t hesitate to contact AX Control via email or phone call. We are here to help you through your system repair process.