0-51862

About the 0-51862

Reliance Electric is the maker of the 0-51862 circuit board. The front panel of the 0-51862 has two anchor points. One anchor at the top and the other anchor at the bottom. Above the lower anchor is a blueish green colored female connection terminal with small anchor points of its own. The front panel also has three black dials. Each dial is labeled zero through ten with four small hash marks in between each whole number. The dials have their own label for what purpose they hold. The top dial is labeled LIMIT 1. The middle dial is labeled LIMIT 2. The bottom dial is labeled STAB. The dials and the female connection terminal all have wires that connect to the circuit board behind the front panel. The dials wires are black and the wires from the female terminal are braided together and are black and orange in color. The circuit board section of the 0-51862 has seven large yellow polypropylene condensers and two red polyester style condensers. The card also has a large gold relay box with a circuit drawing on the lid of the box. The 0-51862 uses two small black transistors, five signal diodes, three orange circular varistor resistors, twenty-eight light blue fusible resistors, one large black thick film resistor, and three small integrated circuits to control it all. For more details see the instruction manuals from Reliance Electric.

If you would like to order the 0-51862 please reach out to the knowledgeable staff of AX Control.