About the 0-52711-10
0-52711-10 64-Bit Data Input Card
The 0-52711-10 from Reliance is designed to function as a 64-bit Data Input Board. This circuit board is typically used in Reliance drives. In some cases, the 0-52711-10 may come from Asea Brown Boveri instead of Reliance, or possibly from Baldor-Reliance. The 52711-10 number will still be reflected in the part id.
The 0-52711-10 does not have an attached faceplate or any type of extractor clip. It is a five-sided board with a narrower front edge as compared to its back edge, and a shorter left edge when compared to the right. There is an oval cutout directly below the top board edge, which thus creates a handle-like extrusion to the board. Underneath this cutout, there is a warning label stating “Card requires setup before installing. Consult EM.” Reliance product manuals will have more information.
The 0-52711-10 has two lines of four toggle switch components. Each of these components has eight toggles on the top of the component that can be set to either ‘off’ or ‘on.’ The board has one additional toggle switch that is located along the board’s diagonal edge between the front and left edges. Other components on the front surface include four lines of four resistor network arrays (sixteen in all,) ten integrated circuits and several lines of carbon composite resistors. The board also has ceramic capacitors and surface wiring.
Reliance publications like manuals, user guides, and data sheets will provide the user with more information regarding board operation, installation, and maintenance. As the original equipment manufacturer, Reliance Electric provided all technical support for the 0-52711-10. This is a static-sensitive board, which will ship from AX Control protected by an anti-static bag or wrap.
