About the 0-52711-11
0-52711-11 Input Card 64 Bit Data IP
The Reliance 0-52711-11 circuit board functions as a 64 Bit Data IP input Card. This board is designed for use within Reliance drives. Typically, this component is labeled with a Reliance logo. However, in some cases, this component may originate from ABB or Baldor-Reliance. The 52711-11 number will be reflected in the part identification number.
The 0-52711-11 is a five-sides board with a very short leading edge. Unlike most boards in this series, is built without an attached faceplate. Instead, the front edge is designed with an oval cutout that is shaped like an extruding handle. Underneath this cutout, the board has a single warning label that states “Card requires internal set-up before installing. Consult E/M.” Please refer to the product manual for more information.
The 0-52711-11 is populated by eight toggle switch components. These are placed on the board in two lines of four. Each toggle switch component has eight individual toggles on its top surface. The toggles are individually numbered and can be set to an ‘on’ or ‘off’ position. The board has one push button switch located on its leading edge. Other components include sixteen resistor network arrays, eleven integrated circuits, carbon composite resistors, transistors, capacitors, and surface wires. The board has a single component marked G00756-6A mounted along its rear edge using three screw connections.
Installation and maintenance information for the 0-52711-11 may be found by using Reliance publications like user guides. These publications will also provide pertinent handling and safety procedures.
