About the 0-52712-9
0-52712-9 Dual Output Card 24 VAC
The 0-52712-9 is a Dual Output Card (24 VAC) fabricated by Reliance Electric. This board is designed to fit into Reliance drive systems. The board can be marked in some instances as being manufactured by Baldor Reliance, or in some rare cases by Asea Brown Boveri. In all instances, the 52712-9 number will remain in the part id. This circuit board is no longer manufactured.
The 0-52712-9 does not have extraction clips or an attached faceplate. The board is manufactured with a longer right edge and a longer back edge (as compared to the front and left.) There is a long oval cut out placed directly below the short leading edge, creating a sort of handle in the board’s surface. This is located directly above the board’s input component. This parallels both the top and diagonal sides of the board. The input component includes screw connections and LED indicators mounted in its front surface.
Other components located on the surface of the 0-52712-9 include transistors, integrated circuits, metal oxide varistors (MOV,) disk capacitors, other types of capacitors, CCRs and metal film resistors, diodes, and surface wiring. The rear edge of the board is populated by eleven metal clips. The board is marked “17” on one side of these clips and is marked “5” on the other side. The board also has a large metal panel mounted parallel to the board’s surface. This is labeled 705329-R. It is mounted using four screws threaded from the bottom surface of the board. Please consult Reliance manuals or user guides for more detailed information.
