About the 0-52824-2
The 0-52824-2 is a board component from Reliance Electric. This circuit board is typically used within Reliance Electric PLCs for machine control. The board weighs approximately 0.55 pounds before the addition of any kind of shipping materials. Please note it is possible your board may be marked as an Asea Brown Boveri or Baldor-Reliance component; typically if the part number is the same the component is compatible. Please check with your original documentation before ordering to ensure this is correct. While this board is no longer available through the OEM, it can be purchased here at AX Control.
The 0-52824-2 is a small circuit board with a front faceplate attached to its leading edge. The faceplate is built with two set screws to secure the board in place once it is installed into a rack system. This faceplate also includes two rotary dials, labeled gain and rate, that connect to a potentiometer on the front of the circuit board, as well as three LED indicators that are labeled as one, two, and gain limit.
The circuit board includes a backplane connector to allow the board to communicate with other components once it is installed within the rack system, along with a number of integrated circuits, resistors, capacitors, transistors, and diodes. There is also a fuse aboard, along with a number of single pin connection points. While these components are not marked with reference designators their location is noted on a grid pattern printed on the board’s surface. Most components have been soldered to the board.
