0-52840-47

About the 0-52840-47

0-52840-47

The 0-52840-47 is manufactured by Reliance Electric for use within the company’s drive systems.  This board component usually is marked with a Reliance logo.  However, in some cases, your original board could have shipped from a company other than Reliance, namely Baldor-Reliance or ABB.  This is only due to changes in the company structure.  If you have questions about compatibility, please reach out to our team. 

The 0-52840-47 is a rectangular circuit board with an attached front faceplate.  The faceplate has two set screws (top and bottom) to lock the module within the rack system after installation.  The faceplate is populated by eight rotary dials that are each individually labeled.  The dials connect to potentiometers located at the rear of the faceplate and that are wired into the surface of the circuit board.  

Other board components include several fields of terminal pins.  Pins on this board are marked off by printed, labeled fields that are responsible for various functions such as jog function, speed comp, and current loop.   The board also has resistors, capacitors, diodes, and surface wiring.  Larger capacitors may be secondarily supported by wires or zip ties to protect their connections to the board.   The board is built with an extending back tab covered with a conductive material.  For more detailed information regarding board components or board function, please refer to Reliance publications like data sheets or user guides. 

AX Control carefully packs every component that leaves our warehouse.  Static sensitive products like this one receive extra care and will be wrapped in an anti-static sleeve or bag before boxing.