About the 0-52840-480
The 0-52840-480 is a plug-in board component for the MaxPak Plus Spindle Drive. There are several versions of this board available here at AX Control. This component is no longer available through the OEM.
The 0-52840-480 CCC card is designed with an attached front faceplate with eight rotary dials. Each of these dials connects to a potentiometer located on the surface of the board and can be individually set. The lowest of these dials use a +/- scale while the remaining dials can be set on a range from zero to ten. The faceplate also includes the Reliance logo, the board number, and two set pins to help the unit remain secure after it has been placed within a rack system.
The 0-52840-480 is marked with a horizontal and vertical grid pattern on its surface to allow users to identify mounted components. Some of these components also include reference designators. The board is built using resistors, capacitors, and diodes, but also includes several wire jumpers. Circuit loops are typically marked on the board’s surface using boxes to cordon off the components used in that loop. Each loop is identified with a written tag.
The MaxPak Plus Spindle drive is a varial speed drive for manufacturing, CNC, and other related uses. The regulator rack where this board plugs into is the bottom section of the chassis and includes a relay interface card, a motherboard, and several regulator plug-in cards.
For additional information about the MaxPak drive or about the 0-52840-480 board, please refer to original documentation from Reliance. This includes user guides, manuals, and datasheets.
