About the 0-54201-1
0-54201-1 Processor Board
The 0-54201-1 functions as a Processor Board within Reliance drives. This board is usually manufactured by Reliance Electric. However, it may sometimes come from either ABB Asea Brown Boveri or from Baldor Reliance. The 54201-1 designator will appear in the part id regardless of the manufacturer.
The 0-54201-1 is a large rectangular circuit board. The board has extractor clips installed in its front two corners. Extractors serve multiple purposes. The clips give technicians a working lever to pull the board when it needs to be removed from a rack system. They also give technicians a place to hold the board so more delicate points on the board are not damaged. The board is drilled along the edges and in its corners. A long, wide house is installed along its rear edge using twelve screws. This is marked 605756-6A.
The 0-54201-1 has a single LED indicator. This is labeled “RUN.” It has a right-angled cable connector on its front edge. The board is populated by TP test points, stab-on connectors, resistor network arrays, disk capacitors, resistors, jumper switches, and over fifty integrated circuits. A grid pattern is marked on the board’s surface. The board does not have a front faceplate.
For more information regarding how the 0-54201-1 Processor Board operates, or for detailed information regarding its installation, please refer to Reliance publications like manuals or series user guides. Reliance, as the original equipment manufacturer, was responsible for providing technical support for this series. Technical support publications will also have extensive information on proper handling and safety procedures.
